I still haven't gotten mine.
I live in Vancouver, Canada and I ordered mine on the 15th.
Any other Canadians not get theirs yet?

I love those pics Jay… I can´t wait for you getting the entire set of boys in gray.

http://www.mwctoys.com/REVIEW_110409b.htm

http://www.mwctoys.com/REVIEW_072104a.htm

http://www.actionfigurepics.com/v/collections/ghostbusters/ray/Ghostbusters+Ray+Stantz+-+with+Egon+Spengler+and+Slimer+_1200x898_.jpg.html

http://www.quickstopentertainment.com/toybox/100.html

Cosmic-Riptide;156118
4. Lastly, and this is a lot more nit-picky, you can't seem to disconnect the trap from it's pedal. So if you mount the trap on Ray's belt the cable and pedal just flop off to the side. The only solution I've found for this is to stick the Relay on the pedal through the loop on Ray's key chain.

I stand corrected. The GBs do lug around the trap with the pedal attached. Ray hangs the pedal over the handle of the trap (by what looks like the red and yellow wires in GB1 … and by what looks like the ribbon cable in GB2). The Ecto Goggles, in turn, are either hung over the Motorola holster (GB1) or the trap handle alongside the pedal (GB2).

Consequently, Egon wears the Trap pedal by either tucking it under the front of his belt (GB1), or hanging it from… what appears to be… the trap holster guard strap (GB2). …though, both times he was holding the actual trap instead of wearing it in the holster.

Additionally, I was able to reshape one of my doll stands into a sturdier configuration for the 12" figures (pics when I have more time).

Cosmic-Riptide;156118
4. Lastly, and this is a lot more nit-picky, you can't seem to disconnect the trap from it's pedal. So if you mount the trap on Ray's belt the cable and pedal just flop off to the side. The only solution I've found for this is to stick the Relay on the pedal through the loop on Ray's key chain.

Even though they do have the trap pedal connected on the belts, it is possible to take the cord and pedal off of the trap. Mine just pulls right off. The cord is connected to the trap through a tab on the back of the trap. If you pull the cord backwards, it comes right off.

I just wonder how it is neither of these two figures are sold out yet…

\m/

IM still Waiting for my figures

Here's some quick pics as promised (please excuse the Sterilite logo, a few tote lids were all I could find for a quickie mid-tone backdrop).



Nothing really special. I simply reshaped the prongs into “L”s, and then angled them slightly upward (so that the tips of prongs sit a little higher than their base). I achieved this with a hard, flat, surface and two sets of pliers.

I put tape around the teeth of the pliers so that they wouldn't chew up the prongs' rubber coating, but alas the coating was so thin and the under-wire so rigid that the coating ended up getting chewed up anyway (though only in the back of the stand). It was a first attempt though, and these things a fairly cheap, so no big deal.

The two prongs are set at about 2.25“ apart at the back, and about 2” at the front. This fits snuggly around the pack and figure without actually putting any pressure on either.

Here's a before and after…

(*peter)

i received all three from my EBAY win of last week…

im VERY happy i bought the 12', its great!